1Technical Specification
Optical Time-Domain Reflectometer (OTDR)

Parameters and conditions	Min	Typ	Max	Unit
Operating
Power consumption		5		W
AC Charger Supply Voltage	100		240	VAC
Supply Frequency	50		60	Hz
Input Voltage	4.8	5	5.2	VDC
Operating temperature range	0		45	°C
Storage temperature range	-25		55	°C
Relative Humidity, non-condensing	0		95	%
Timing Specification
Master clock frequency		200		MHz
Master clock accuracy			<+/- 10	ppm
Master clock period jitter			<+/-10	ps
ADC/FPGA clock frequency		100		MHz
ADC sample width		14		bits
ADC bandwidth	650			MHz
Minimum time resolution between two consecutive samples	100			ps
Highest data point resolution	~2	~3	~4	mm
Equivalent sampling rate			10	Giga samples/s
Storage size1		262144 (2^18)		Samples
Storage width		32		bits
Summing before overflow	262144			cycles
USB data transfer rate		2 000 000		32-bit sam/s
Optical Specification
Number of lasers / board2	1	2		3
Laser power2	15	Laser dependent	120	mW
Laser wavelengths: SM		1310/1490/1550/		nm
		/1625 (all ± 20)
Laser wavelengths: MM		850/1300		nm
		(all ± 20)
Laser pulse width range3	5		100 000	ns
Index of refraction range	1.4		1.7
Avalanche Photodiode power supply	40		90	VDC
Avalanche Photodiode gain (M)	1		50
Avalanche Photodiode bandwidth at M=10	2.5	5		GHz
Dynamic Range, SNR = 1, SM	30		45
Dynamic Range, SNR = 1, MM		25
Loss resolution		<±0.001		dB
Mechanical
Bulkhead connector: FC standard		FC, LC, ST, SC
USB receptacle: Type A standard		A, B Mini-A, Mini-B

Notes and comments:

¹ Point number selection is arbitrary

² Laser number and types are optional

³ Range can be incremented in 5ns steps throughout the range

All specifications listed herein are preliminary and typical; they may be changed at any time without notice.